Preparing Battery For Operation; Charging The Battery, Leds And Signals - Stihl AR 2000 L Gebrauchsanleitung

English
► Store the battery in non-conductive packag‐
ing.
► Store the battery at temperatures
between -10°C and +50°C.
■ The connecting cable must not be used for
carrying or hanging up the battery. The con‐
necting cable and the battery may be dam‐
aged.
► Wind up the connecting cable and secure it
to the battery.
4.9 Cleaning, Maintenance and
Repair
WARNING
■ Aggressive cleaning agents, cleaning with a
jet of water or pointed objects can damage the
battery, carrying system, connecting cable and
AP adapter. If the battery, carrying system,
connecting cable and AP adapter are not
cleaned correctly, components may no longer
function properly or safety devices may be
rendered inoperative. They may cause serious
injury to persons.
► Clean the battery, carrying system, con‐
necting cable and AP adapter as described
in this instruction manual.
■ If the battery, carrying system, connecting
cable and AP adapter are not serviced or
repaired correctly, components may no longer
function properly or safety devices may be
rendered inoperative. This may result in
serous or fatal injury to people.
► Never attempt to service or repair the bat‐
tery, carrying system, connecting cable or
AP adapter.
► If the battery, carrying system, connecting
cable or AP adapter need to be serviced or
repaired: Contact a STIHL servicing dealer
for assistance.
5 Preparing Battery for Oper‐
ation
5.1

Preparing Battery for Operation

Perform the following steps before starting work:
► Check the LEDs and beeps,
► If 4 LEDs flash red and short beeps sound
in quick succession: Do not use or transport
the battery, contact your STIHL servicing
dealer.
There is a malfunction in the battery.
► Fully charge the battery,
► Clean the battery,
► If you use the connecting cable:
22
6.3
6.1
17.1
5 Preparing Battery for Operation
► Clean contacts on the connecting cable,
17.2
► Fit the connecting cable or battery and con‐
necting cable on the carrying system.
► Make sure the battery is in a safe condition,
4.5.
.
► The battery, carrying system, connecting cable
and AP adapter are used: Check that the car‐
rying system, connecting cable and AP
adapter are in a safe condition,
► If you cannot carry out these steps: Do not use
the battery and contact your STIHL dealer for
assistance.
5.2 Connecting Battery to STIHL
App
► Activate Bluetooth® radio interface on mobile
device.
► Activate Bluetooth® radio interface on battery,
7.1.
► Download STIHL App from app store of your
mobile device and create an account.
► Open and register STIHL App.
► Add the battery in the STIHL App and follow
the instructions on the screen.
For contacts and other information visit https://
support.stihl.com/ or see information in the App.
The STIHL connected feature is available in the
STIHL App in certain markets.
6 Charging the Battery,
LEDS and Signals
6.1 Charging the Battery
The charging time depends on several factors,
e.g. temperature of the battery or the ambient
temperature. The actual charging time may differ
from the specified charging time. For specified
charging times see www.stihl.com/charging-
times.
The charging process starts automatically when
the plug is inserted in a wall outlet and the AP
adapter is fitted in the charger. The charger
switches itself off automatically when the battery
is fully charged.
The battery and charger become hot during the
charging process.
The STIHL AL 300 and AL 500 chargers have a
built-in fan which may cut in and out during the
charging process.
► Fit the connecting cable, or battery and con‐
necting cable, on the carrying system.
8
4.5.
0458-820-9921-B