Displaying State Of Charge; Activating And Deactivating Bluetooth® Radio Interface - Stihl AR 2000 L Gebrauchsanleitung

7 Activating and Deactivating Bluetooth® Radio Interface
3
3
1
2
► Insert the plug (7) in a convenient wall outlet
(8).
The charger (5) runs a self test. The LED (4)
glows green for about 1 second and then red
for about 1 second.
► Fit the connecting cable (6).
► Insert the battery cable plug (1) in the
socket (2) on the AP adapter (3).
► Insert the AP adapter (3) in the guides in the
charger (5) and press it home as far as stop.
The LED (4) glows green. The LEDs on the
battery glow green and the battery is charged.
► When the LED (4) and the LEDs on the bat‐
tery stop glowing: The battery is fully charged.
The AP adapter (3) can be taken out of the
charger (5).
► If the charger (5) is no longer required. Dis‐
connect the plug (7) from the wall outlet (8).
6.2

Displaying State of Charge

► Press the button (1).
The LEDs (5) glow green for about 5 seconds
and indicate the state of charge. There is a
short beep.
► If the right-hand LED flashes green and there
are six long beeps: Charge the battery.
6.3 LEDs and Beeps
The LEDs and beeps can indicate the following
information about the battery:
– State of charge
– Activation and deactivation of Bluetooth®
interface.
– Malfunctions
0458-820-9921-B
8
5
4
7
6
100 % 0 %
The LEDs can glow or flash green or red. The
right-hand LED can also glow or flash blue.
Beeps may be short or long.
The state charge is indicated when the LEDs
glow or flash green and there is a short beep.
► If the right-hand LED flashes green and there
are four long beeps: Charge the battery.
► If the LEDs glow or flash red or there are no
beeps: Rectify the malfunction.
There is a malfunction in the cordless product
or battery.
► If the four right-hand LEDs on the battery flash
red and short beeps sound in quick succes‐
sion: Troubleshooting,
There is a malfunction in the battery.
If the right-hand LED on the battery glows blue
and there are three short beeps: The Bluetooth®
radio interface on the battery is activated,
If the right-hand LED on the battery flashes blue
and there are three short beeps: The Bluetooth®
radio interface on the battery is deactivated,
7.2.
7 Activating and Deactivating
Bluetooth® Radio Interface
7.1 Activating the Bluetooth
Interface
► Press the button and hold it depressed for
about 3 seconds.
The right-hand LED glows blue for about 3
seconds. You will hear 3 short beeps. The
Bluetooth® radio interface on the battery is
activated.
7.2 Deactivating the Bluetooth
Radio Interface
► Press the button and hold it depressed for
about 3 seconds.
The right-hand LED flashes blue six times.
You will hear 3 short beeps.
English
19.1
19.1.
7.1.
Radio
®
®
23