Sony SDM-HS73P Handbuch Seite 37

Symptom
Picture is fuzzy
Picture is ghosting
Picture is not centered or sized
properly
Picture is too small
Picture is dark
Wavy or elliptical pattern (moire)
is visible
Color is not uniform
White does not look white
Monitor buttons do not operate
( appears on the screen)
Displaying this monitor's information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
MENU
Example
INFORMATION
MODEL : SDM-HS73P
SER NO : 1234567
MANUFACTURED : 2003-52
18
Check these items
• Adjust the brightness and contrast (page 11).
• Adjust the pitch and phase (page 12).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280 × 1024) on your computer.
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Adjust the pitch and phase (page 12).
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
the edges.
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the computer's resolution to the screen's resolution.
• Adjust the brightness using the BRIGHTNESS menu (page 11).
• Adjust the backlight (page 11).
• Adjust the brightness using the
• It takes a few minutes for the display to become bright after turning on the monitor.
• Adjust the pitch and phase (page 12).
• Adjust the pitch and phase (page 12).
• Adjust the color temperature (page 13).
• If the menu lock is set to ON, set it to OFF (page 14).
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS73P
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Model name
Serial number
Week and year
of manufacture
button (page 10).