Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LED effect beamer Cloud
Mounting
The LED effect beamer Cloud can be mounted on walls and
ceilings. For mounting, use the mounting bracket.
The direction can be fixed with the supplied allen key.
Operation:
• Plug the power supply into a 230 V socket and connect it to
the device.
• Press the On/Off switch.
• The speed control will change the rotation velocity of the
projections.
• The Sound-to-Light function is activated by pressing the
"Sound Activation" button. The microphone at the back of
the device picks up the bass impulse and uses this for the
control.
Cleaning and maintenance
Always use a soft, dry and lint-free cloth to clean the unit's
exterior. If the device is extremely dirty, you can use a soft
cloth dampened with water, or a mild washing-up liquid to
clean. Never use any abrasive or harsh cleaning agents (e.g.
alcohol, petrol or thinners) as these could damage the con-
trols, casing or any markings and labels found on the device.
14
Werbung
Inhaltsverzeichnis
