THOMSON MIC215i Bedienungsanleitung Seite 19

CD PlAYBACK
• Press the q button to turn the unit on.
• Press the button to open the CD door. Place a disc
in the center with the label side up and then close the
CD door gently.
• Press the FuNCTION button to select CD mode. "cd"
appears and "- -" blinks on the display. Then the total
track no. is shown on the display.
• Press the 12 button to start playing.
• Adjust the volume levels.
Note:
• The appliance is designed to playback MP3 and other
audio CDs. You will be made aware of functions that
differ depending on whether a MP3 or other audio CD
is played.
• When having inserted a MP3 CD, the MP3 indicator is
lighted while in «CD» operating mode.
To pause playback
• Press the 12 button.
• To resume playback, press the 12 button again.
To stop playback
• Press the 3 button.
Skipping to another track
• Press either the 7 or 8 button according to the
desired direction.
• Press the 7 button to skip to the start of the current
track or skip to previous tracks.
• Press the 8 button to skip to the beginning of the next
track.
locating a particular point on a track
• Keep either the 7 or 8 button press and hold during
playback, according to the desired direction, and
release at the desired point.
Play track from different folder (only for mP3 CDs with file
folders)
• Press the FOlDER w/s button to select the next MP3
folder. The FOlDER indicator lights up whenever a
button is pressed.
REPEAT PlAYBACK
Repeat current track
• Press the mEm.uP/ button until "
the display. The current track will be played repeatedly.
Repeat the entire CD
• Press the mEm.uP/ button until "
blinking and remains on. All tracks will be played
repeatedly.
Cancel playback mode
• Press the mEm.uP/ button until "
RANDOm PlAYBACK
Random playback
• Press the RANDOm button on the remote control and
"RANDOM" will be show. All tracks will be played
randomly. After all tracks have played, the unit will stop
automatically.
MICRO SYSTEM
MIC215i
Cancel random playback
PROGRAmmABlE CD PlAYBACK
A program of up to 20 tracks can be set to play in a preset
order.
To check the program
To change the programmed tracks during program
playback
To erase the whole program, do one of the Following
lISTENING TO YOuR iPod/iPhone
Compatible iPod/iPhone Types & supplied adaptors
" blinks on
" stops
" disappears.
• Press the RANDOm button on the remote control
again during RANDOM playback to return to normal
playback.
• In CD standby mode, press the mEm/
"- -" will blink and the "mEmORY" indicator will blink
on the display.
• Press the 7 or 8 buttons to select the desired track
then press the mEm/ button to store the track in
memory.
• To add additional tracks, repeat the previous step (up
to 20 tracks).
• To start playback, press the 12 button.
• Press the 3 button, then press the 7 or 8 buttons to
check the programmed tracks.
• Press the 3 button and press the mEm/
repeatedly to search the program number, and then
press either the 7 or 8 buttons to select the desired
track. Press the mEm/ button again to register the
newly selected track into program.
• Press the 3 button twice.
• Press the FuNCTION button to change to Radio/
iPhone/Line-in mode.
• Press the q button to turn off the unit.
• Press the button to open the CD door.
• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod classic
• iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th generation)
• iPhone 4
• iPhone 4S
• iPhone 3GS
• iPhone 3G
for
iPhone
1
for for
iPod nano 5th iPod nano 4th
4
3
USING
button, the
button
for
iPod touch
2
for
iPhone 4
17 EN