Acer HMU.0550.003 Benutzerhandbuch Seite 7

AT Commands Set Summary
Command Description
A/ Re-execute command
AT=X Write to Selected
S-register
AT? Read selected
S-register
A Answer
Bn CCITT/Bell mode
Cn Carrier control
Dn Dial
En Command echo
Hn Disconnect and hook
control
In Modem identification
Ln Speaker volume
Mn Speaker control
On Return to on-line data
mode
P Set pulse dialing as
the default
Qn Result code control
Sn Access S-register
Command Description
&Dn Data terminal ready
(DTR) option
&Fn Restore default
configuration
&Gn Select guard tone
&Kn Flow control
&Mn Mode selection
&Pn Pulse dialing control
&Qn Mode selection
&Tn Test and diagnostics
&Sn Data set ready (DSR)
option
&V Display current
configuration
&Wn Store current
configuration
&Yn Select default reset
profile
&Zn=x Store telephone
number
%En Auto fallback/
fallforward control
\An Select maximum MNP
block size
5