White circle
Tighten the
fixing screw.
Install the cover along the guide.
12
D
Remove the lens cover from the rear end of the lens
unit.
Use the cover when storing or transporting the lens unit
on its own. Keep the cover for future use.
E
Insert the lens unit straight into the lens insertion
section with the white circle on the lens on top.
F
While holding the lens unit firmly, turn the lock
lever of the lens unit clockwise until it is locked.
Check that the lens cannot be detached.
G
Replace the front cover. After replacing the front
cover, make sure that it cannot fall off.
Tighten the two
fixing screws.