Safety Instructions For Maintenance; Assembly - Husqvarna LB 442i Bedienungsanweisung

Safety instructions for
maintenance
WARNING: Read the
warning instructions that
follow before you use the
product.
• Remove the safety key before
you do maintenance on the
product.
• Do the maintenance work
correctly to increase the
lifetime of the product and
decrease the risk of accidents.
Let an approved service agent
do the professional repairs.
Speak to your nearest service
agent for more information.
• Only do the maintenance work
written in this operator's
manual.
• Put on heavy duty gloves
when you use the cutting
Introduction
WARNING:
safety chapter before you assemble the
product.
To assemble the handle
1. Remove the handle nut and the washer from the
plate on the upper handle.
2. Put the upper handle in position on top of the lower
handle.
1520 - 002 - 09.11.2020

Assembly

Read and understand the
equipment. The blade is very
sharp and cuts can easily
occur.
• Keep the cutting edges sharp
and clean for the best and
safest performance.
• Let your service agent
regularly examine the product
and make necessary
adjustments and repairs.
• Replace damaged, worn or
broken parts.
• Obey the instructions for how
to change accessories. Only
use accessories from the
manufacturer.
• When not in operation, keep
the product, battery and
battery charger apart in a dry,
indoor and locked area. Make
sure that children and persons
that are not approved cannot
get access to the product,
battery or battery charger.
CAUTION:
are not caught or become damaged.
3. Attach the washer and the handle adjustment lever.
(Fig. 20)
4. Turn the handle to the side for a good operation
position when you operate the product near a wall.
(Fig. 21)
Make sure that the wires
15