BALDR B0359WST2H2PR-V1 Bedienungsanleitung Seite 14

to be consistent with the reading of the equipment you are
more trusted or more used to, you can manually calibrate the
indoor temperature, humidity and barometer values.
1. When in time display mode, press and hold "▲" button to enter
Calibration mode.
2. Press and release the "SET" button to confirm and move to the
next setting: Indoor Temperature →Indoor Humidity→ Barometer
→Exit.
3. Press "▲ " or " ▼/RCC " button to adjust the value.
4. Indoor temperature calibration range : ±5 ℃ ;
Indoor humidity calibration range: ± 10 %RH;
Barometer calibration range: ±10 hPa.
5. During setting,you can press "MEM" button to clear all correction
values.
6. During setting, touch top button to save and exit setting. If no
operation for 20 seconds, it will automatically save and exit setting.
ADJUSTABLE BACKLIGHT
● After powering on, touch "
of the backlight.
● Backlight brightness can be selected from 5%,60%,100% and off.
LOW BATTERY INDICATORS
● About Outdoor Sensor: When battery indicator shows next to the
outdoor temperature, replace batteries in your outdoor sensor.
● About Cell Battery in Main Unit: The CR2032 cell battery is only for
memorizing the setting during sudden power outage. When battery
indicator shows next to your Indoor Temperature, replace battery.
" button to adjust the brightness
14