System Requirements; Connecting Monitors - i-tec TB3TRIPLEDOCKPD Gebrauchsanweisung

SYSTEM REQUIREMENTS

Hardware requirements: Device with a free Thunderbolt 3 or USB­C* port
Power Delivery requirements: a device with a free Thunderbolt 3 or USB­C* port with
„Power Delivery" support.
Operating system: Windows 10, macOS and Linux with the latest updates
To play Ultra HD 4K/5K/8K videos, your computer must be able to decode this video with
its graphics processor. Especially in less powerful laptops, they can handle 4K/5K/8K
video playback, but the result is not ideal (interruption, video tearing).
INSTALLING THE DRIVERS
The docking station can be connected directly, the drivers are included in the operating
system. For Windows 10, please make sure that you have the latest Thunderbolt™ 3
drivers from your laptop manufacturer installed in your computer.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO LAPTOP / TABLET)
1. Turn on the laptop / tablet and connect the power adapter to the docking station.
2. Connect the docking station power adapter to the AC 110 V / 230 V network
3. Connect the Thunderbolt™ 3 cable to the Thunderbolt™ 3 port on the back panel of
the docking station.
4. Connect the second end to a free Thunderbolt™ 3 / USB­C* port of your laptop / tablet.
5. In Windows OS, permit a new Thunderbolt™ 3 device – see figure
6. In Linux, enable the new Thunderbolt™ 3 device. Must be displayed as Enabled
7. Subsequently, the automatic installation of ports in each system starts.
8. After finishing installation, we recommend that you restart the laptop / tablet.

CONNECTING MONITORS

To connect a monitor to the docking station, use a DisplayPort or HDMI cable, or USB-C /
Thunderbolt 3 adapter to connect the monitor via the Thunderbolt 3 port. The screen of
your laptop / tablet may flash while the external monitor is installing. This is normal.
The docking station supports the connection of a maximum of three monitors.
Display interface: 1x DisplayPort, 1x HDMI, 1x Thunderbolt 3
In order for three external monitors to function, the laptop lid must be closed.
8K resolution is supported only if Thunderbolt™ 3 connector
ENGLISH
1 monitor connected through 1 DisplayPort cable
- resolution up to 8K 7680x4320/30Hz
of your laptop supports DisplayPort 1.4.
If Thunderbolt™ 3 only supports DisplayPort 1.2,
the maximum resolution is 4K 3840x2160/60Hz
Quick Start
| 7
ENGLISH