System Requirements - i-tec C31SMARTDOCKPD Gebrauchsanweisung

Quick Start / C31SMARTDOCKPD/ English

SYSTEM REQUIREMENTS

Hardware requirements: Device with a free USB4, Thunderbolt or USB-C port
Requirements for Power Delivery: devices with a free USB4, Thunderbolt or USB-C port with
"Power Delivery" support
Video output requirements: devices with a free USB-C port with "DisplayPort Alternate
Mode" support or a Thunderbolt or USB4 port.
• Operating system: Windows 10/11, macOS, Android, Chrome OS and Linux with latest
updates
Once connected, the drivers for the docking station are automatically installed from the
system.
If LAN installation is required, please download the current drivers from our website ww-
w.i-tec.cz under the "Download" tab for this product.
WARNING!
Before plugging in the dock, make sure you have the latest drivers for your device and
an updated BIOS installed on your system.
HDMI/DISPLAY PORT MONITOR CONNECTION
The docking station is equipped with 1x HDMI port, 2x Display Port 4K port for connecting
an external monitor or projector with HDMI / DP interface. Use a high quality HDMI / DP
cable to connect your monitor to the docking station. During installation of the additional
monitor, the device screen may flicker, which is a standard condition.
1 monitor connected via DisplayPort/HDMI cable - resolution up to 4K 3840x2160/60Hz.
4K/60Hz resolution is only supported if your laptop's USB-C/Thunderbolt™ 3 connector
If USB-C/Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum possible resolution
EN 8
supports DisplayPort 1.4 DSC or DisplayPort 1.4 without DSC.
is 1x 4K 3840x2160/30Hz.