Werbung
The mounting must only be done by experts.
Warning: defective mounting is dangerous!
that the
the customer which is appropriate to the load.
Electrical installations should only be carried out by a
specialist electrician
shower.
tries must be observed.
on the packaging.
Caution: only remove the protective caps on the mirrored
Use suitable spacers or distance blocks to even out the
to the dimensioned layout.
TOOLS
Spirit level
4 mm Allen key
Screw clamps
Pencil
Silicone sealant
Laguna Platino 2.0
9
MAINTENANCE INSTRUCTIONS
Caution:
paste or scouring powder.
i
Caution
MOUNTING SEQUENCE
For the figures, see the attachment
i
1. Remove the doors and drawers (Fig. A/A1)
2. Mount the lamps (Fig. B/B1/B2)
The mains wire should not be live!
3. Hang up the furniture
4. Mount the plate/cabinet
(Fig. C)
(Fig. D)
5. Mount washstand
For the installed vanity unit:
Putting on the washstand (Fig. E)
(Fig. E1)
For top vanity unit:
Sealing the washstand (Fig. E6)
6. Align furniture (Fig. G/G1/G2/G3/G4/G5/G6)
7. Install the tap (Fig. H)
Warning: Use the enclosed rubber seal.
8. Screw on the shelf (Fig. I)
Warning:
9. Mount the protoboard (Fig. J)
10. Mount the doors and drawers (Fig. K/K1/K2)
11. Aligning the doors (Fig. L/L1/L2)
Important: Loosen the existing connection bracket!
12. Adjusting the drawer (Fig. M/M1/M2)
13. Mount the rollers (Fig.N)
14. Adjusting the folding hinge (Fig. O)
15. Mount the mirror grip (Fig. P/P1)
Laguna Platino 2.0
Laguna Platino 2.0
(Fig. D/D1)
(Fig. E2/E3/E4/E5)
9
Werbung
