THOMSON MIC200 Bedienungsanleitung Seite 13

USING
uSING THE CD PlAYER
Comment: Before first use, remove the protective cardboard
insert on the lens located in the CD compartment (B).
Move the compartment door with care.
Playing a CD:
• Open the CD compartment door and insert a CD
(printed side up).
• Close the CD compartment by hand.
• Turn the appliance on by pressing q button and press
SOuRCE to select "CD" mode.
• Adjust the volume using the keys
REPEAT mODE
During playback, press REPEAT or PlAY mODE several
times.
• NORmAl: stops repeat.
• REPEAT ONE: repeats one track.
• REPEAT All: repeats all tracks.
• REPEAT FlD: repeat all albums (only MP3 files).
• RANDOm: playback random.
NORMAL REP ONE
NORMAL REP ONE REP ALL
PROGRAmmED PlAYBACK
Programming up to 20 tracks in order:
• The CD or USB must be stopped.
• Press on the PROG key: "P01" is displayed on the
screen.
• Press keys 5 and 6 to choose a track.
• Press the PROG key to save each track (20 maximum).
• Press the key 12: the appliance plays the tracks in the
order programmed.
• To cancel programmed playback, press on the 3 key
twice.
EQuAlISER
Press successively EQ button to adjust the sound effects
depending on the type of music you are listening to:
POP
JAZZ
FLAT
uSB PORT
The appliance is fitted with a USB port (A) to play music
files (MP3) stored on a USB key.
• No disc should be playing.
• Connect a USB drive to the USB port (A) of the reader.
• Press successively SOuRCE: "USB" appears on the
screen and reading the contents of the USB stick is
read automatically.
• Select "USB" to read the contents of the USB key.
The playback functions are the same as for a CD.
MICRO SYSTEM
MIC200
and .
REP ALL RANDOM
REP FLD RANDOM
ROCK CLASSI
Comment:
• Press the Mode Selector (3) to select the "USB"
function.
• It is recommended that key content is backed up to
avoid data loss.
• IMPORTANT: 32 GB maximum capacity. The reader
does not work with all USB devices (external hard
drives for example.)
ID3 (metadata ID)
When listening to an MP3 file via USB or CD:
Press ID3/RDS on the remote control to display track
information: album, title, artist (if the data has been filled in
for the file).
uSB RIPPING
The Ripping enables the contents of an audio CD to be
copied onto a USB device. The files are copied in MP3
format.
Comments:
• Check that there is enough free memory on the USB
device.
In CD mode:
• Press on the remote control: the screen displays
REC then RIP All to show that it has started
conversion of the tracks.
When a CD is playing:
• Press on the remote control: the screen displays
REC then RIP ONE to show that it has started
conversion of the track currently being played.
Conversion can be run in any order and will continue
to the end of the CD. Press
any time.
HEADPHONE SOCKET
Headphones (not provided), fitted with a Ø 3.5mm jack and
not exceeding 100dB can be connected to the appliance.
• Connect the headphones to the socket (D).
Note: When the headphones are connected, the loud
speakers are automatically inactive.
Use the appliance at a comfortable volume to preserve user
health.
AuXIlIARY FuNCTION
• Connect a portable CD or MP3 player to the AUX IN (E)
socket using an audio cable (cable not provided).
• Turn the appliance on.
• Press SOuRCE several times: "AUX IN" is displayed
on the screen.
• Use the peripheral device commands directly.
to stop the process at
11 EN