CSL 300149 Kurzanleitung Seite 8

4. Driver installation
The driver installation is usually fully automatic. If the automatic installation of
the device is not successful, please carry out the setup manually as described
below.
Insert the driver CD into your drive and close the drive again. Call up the contents
of the CD in My Computer or Explorer and start the installation by double-clicking
on "setup.exe".
A security prompt appears, which you must confirm with "Yes".
8
Insert the PCI card into the designa-
ted slot. Make sure that the card is
firmly seated in the slot. Then fasten
the card to the PC housing with a
screw.
English