Appliance Overview - Zanussi ZBC40440 Benutzerhandbuch

MICROWAVE OVEN & ACCESSORIES
1. Fixing points (4 points)
2. Grill heating element
3. Convection heating element
4. Oven lamp
5. Control panel
6. Shelf runners
7. Waveguide cover
8. Oven cavity
9. Coupling
10. Door seals and sealing surfaces
11. Door opening handle
12. Air-vent openings
13. Outer cabinet
14. Power cord
15. Power supply cord support clip
Check to make sure the following accessories are provided:
16. Turntable
18. Low rack
20. Rack for glass tray
• Place the turntable support into the coupling in the
centre of the oven floor, ensuring you place it TOP side
up (TOP is engraved on one side). It should be able to
freely rotate around the coupling.
• Place the turntable on to the turntable support.
• Place the high/low racks onto the turntable if necessary.
• Slide the glass tray into the shelf runners. You may cook
dishes directly in the tray or set the rack inside the tray
when roasting in order to catch drippings.
Important:
• Always operate the oven with the turntable and support
fitted correctly. This promotes thorough even cooking. A
badly fitted turntable may rattle, may not rotate properly
and damage the oven.
• The turntable rotates clockwise or counter clockwise.
The rotary direction may change each time you start the
oven. This does not affect cooking performance.
• When you order accessories, please mention two
details: part name and model name to your dealer or
ZANUSSI service agent.
11
17. Turntable support
19. High rack
21. Glass tray

APPLIANCE OVERVIEW

2
1
10 1
14
15
18 19
These racks are used for cooking in
Convection, Dual or Grill mode.
7
3 4
8 7
9
12
16
17
Coupling
1
5
6
1
13
20
21