Smartwares DIC-222 Serie Bedienungsanleitung Seite 5

INSTALLATION
When running the wires, please make sure that they are not placed directly next to electrical wiring, This
could cause interference in your connection.
Testing the unit
When testing the unit, please make sure that the indoor unit and the outdoor unit are at least 10 meters
apart. If the units are to close together, you could experience a high-pitched sound and echoes.
1
2
ON
8
5. Take out the green terminal from accessories
bag, connect the wires to the outdoor unit
2 1
6. Take out the orange terminal from accessories
bag, connect the wires to the power
EN
INSTALLATION
1
2
Green
Orange
7. The green terminals into the 1.2
8. The orange terminal into the DC 15V IN
9. Plug in the power and check the wiring is
correct
10. Cover the panel
11. Indoor-monitor to insert the smart bracket.
EN
9