Assembly; Operation - Vacmaster JOEY Bedienungsanleitung

GB
1. Remove all the contents from the packaging; make sure you have all contents as listed on page 7.
2. Position the neck of the motorized floor head into the upright position. Insert the lower handle
assembly onto the neck of the motorised floor head ensuring that there is nothing trapped
between the unit connections. Check that both security latches on the motorised floor head are
clicked into place (Fig.1).
3. Insert the upper handle assembly into the top of the lower handle assembly and lock into place
(Fig. 2).
4. Place the handheld unit into the docking bay on the main body. Ensure the suction port of the
handheld unit is positioned into place first and that the dust bin is securely fitted before pressing
the handle into the locking position (Fig. 3).
5. Insert the vacuum cleaner support and tool attachment holder onto charging base and click into
place (Fig. 4).
CAUTION
brush roll when the vacuum cleaner is operating. Touching the brush roll while it is rotating
can cause personal injuries. Use caution when operating near children or pets (Fig. 5).
WARNING
1. Charging
NOTE: To optimise the battery longevity, ensure the vacuum cleaner is fully charged before first
use. Charge the vacuum cleaner for at least 5.5 hours before using for the first time. Never charge
the batteries in temperatures above 40°C or below 4°C. It is normal for the charger to become
warm when charging.
NOTE: Only recharge your vacuum cleaner with the supplied charger.
1) Before charging, make sure the cordless vacuum is turned OFF and the handheld vacuum
cleaner unit is installed in the main body.
2) Choose the desired plug to fit onto the charging adapter body for the operating region (Fig. 6).
NOTE: The three pin plug is for UK, while the two pin plug is suitable for almost all other European countries.

ASSEMBLY

OPERATION

: Moving parts! To reduce the risk of personal injury, DO NOT touch the
: Do not operate the vacuum cleaner without a filter in place.
8