Vacmaster JOEY Bedienungsanleitung Seite 13

PROBLEM
Brush roll is jammed.
Motorised brush
Brush roll needs to be reset.
not turning.
Brush roll is not installed correctly.
Dust bin is full.
Filter needs cleaning.
Dirt pick-up is poor
Filter needs to be replaced.
or suction power is
weak.
Battery may be depleted.
Dust bin is not installed correctly.
Filter is missing or installed
incorrectly.
Dust escapes from Filter is damaged and needs to be
vacuum. replaced.
Dust bin installed incorrectly.
Battery may be depleted.
Vacuum turns off
on its own.
Brush roll is jammed causing
motor protection system activated.
POSSIBLE CAUSE
13
SOLUTION
Remove obstruction Follow
instructions on page 11.
Turn the unit off and remove the
obstruction, then turn back on.
Remove brush roll and reinstall
following instructions on page 11.
Empty dust bin.
Follow filter cleaning instructions on
page 10 & 11.
Replace the filter. To purchase online
at www.cleva-europe.com.
Charge the battery as instructed on
page 8 & 9.
Check dust bin for correct installation
and ensure it is snapped firmly in
place.
Check filter for correct installation.
Replace the filter. To purchase online
at www.cleva-europe.com.
Position dust bin correctly and snap
firmly into place.
Charge the battery as instructed on
page 8 & 9.
Thoroughly clean the brush bar and
in the vacuum head. Replace the
brush bar if necessary.
GB