Required Assembly Tools (Lfi-120/220 Only); Cable Outlet (Lfi-120/220 Only) - Fohhn LF-120 Bedienungsanleitung

(14) Earthing screw
Earthing screw (14) for earthing the Linea_focus correctly.
The unit must be earthed prior to operation without fail!
(15) Cable outlet with cable grip
Cable outlet with cable grip for connection cables.
(15) Cable outlet with cable grip
Fohhn-Net Remote
The Fohhn Control Network.
(8) Fohhn-Net Remote connection sockets
(9)
Connection terminals (8) and (9) for the Fohhn-
Net.
See separate user instruction Fohhn Audio Soft!
(10) receive LED
LED indicates that the Linea_focus is receiving data.
(11) send LED
LED indicates that the Linea_focus is sending data.
(10)(11)(12) Status LEDs
(14) Earthing screw
5.6 Required assembly tools
(a)
(b) (c)
(a) Allen key 4 mm (for wall bracket)
(b) Small screwdriver for the Phoenix connector fitting
(c) Screwdriver for opening the lower front grille
(d) Crosshead screwdriver for opening the service flap
(e) 5.5 socket wrench for the 4 cable grip nuts
(f) Knife for cutting the rubber over the cable outlet opening
(g) Size 8 spanner for the earthing screw
5.7 Cable outlet
Opening on the back of the housing through which all connection
cables are routed. Cut the slit on the rubber cover using the knife
to manufacture an opening wide enough for the cable harness.
(e) (f) (g)
(d)
Linea_focus | 31