Technical Data; Scope Of Delivery; Application Areas; Placing In Service - T.I.P. SPU 36000 Gebrauchsanweisung

2. Technical data

Model
Power consumption of the UVC tube
UV-C-tube type / performance
Service life of the UVC tube
Degree of protection / protection class – UVC emitter
Length of the connecting cable - UVC emitter
Voltage / frequency, primary (input)
Degree of protection - transformer
Max. flow rate (Qmax)
Operating pressure max. (Pmax)
Maximum temperature of the pumped liquid (Tmax)
Minimum temperature of the pumped liquid
For ponds up to
Weight (net)
Filter dimensions, mounted (W x D x H)
Item number

3. Scope of delivery

T.I.P. UV-C lamp, 2 reducing parts, 2 hose connectors, operating instruction.
Check the device for transport damage and complete delivery. If there is damage
the retailer must be notified without delay, at the latest however, within 8 days of
the purchase date.

4. Application areas

This UVC lamp is provided for use on ponds or pools to clean contaminated water
when no one is in it. The use of a UVC lamp can reduce the chlorine concentration
needed by 50 - 80%. The UVC lamp neutralises bacteria, viruses, and other
harmful organisms and prevents them from propagating. The device has been
developed for private use and not for industrial or commercial purposes.

5. Placing in service

Avoid when tightening screw excessive force that may cause damage. Please
observe the illustrations, too, which are contained as an attachment at the end of
the present operating instructions. The numeric and other details included in
brackets below refer to these illustrations.
UV-C SPU 36000
40 W
4 Pin 2G11 / 36 W
ca. 8,000 h
IPX4
5 m
230 V~ / 50 Hz
IPX4
7,000 l/h
1.0 bar
35 °C
5 °C
36,000 l
2,7 kg
55 x 16.5 x 11.5 cm
30447
4
15