Carson STUNT WARRIOR X10EB Chassis Betriebsanleitung Seite 6

Problem Cause
Model doesn´t move Transmitter or chassis power switch is not
"ON"
Polarity or battery type is wrong
Batteries have run down
Loss of control Batteries have run down
Antenna is missing or not attached properly
Doesn´t run straight Steering trim is not adjusted correctly
Front and rear wheel nuts are too lose
Doesn´t stop Throttle trim is not adjusted correctly
Doesn´t reverse Throttle trim is not adjusted correctly
Wrong action
Running too slowly Batteries have run down
Motor has lost power
Dust or foreign objects are inside gears
500404057_X10EB_StuntWarrior2WD_RZ_Version2.indd 21
500404057_X10EB_StuntWarrior2WD_RZ_Version2.indd 23
Correction
Switch power on receiver or transmitter
Check polarity and type of battery
Change batteries or charge them
Change batteries or charge them
Attach receiver antenna
Make adjustment
Tighten wheel nuts
Make adjustment
Make adjustment
Control properly
Change batteries or charge them
Change to spare motor
Turn the power switch "OFF" and clean out
gears
21
10.07.14 12:37
23
10.07.14 12:37
22
500404057_X10EB_StuntWarrior2WD_RZ_Version2.indd 22
24
500404057_X10EB_StuntWarrior2WD_RZ_Version2.indd 24
10.07.14 12:37
10.07.14 12:37