In 1 Usage Of Multi-Temp Thermometer; As A Non-Contact Thermometer - Fora IR10 Bedienungsanleitung

All manuals and user guides at all-guides.com
5 IN 1 USAGE OF MULTI-TEMP
THERMOMETER
Press the ON/SCAN button to turn on the thermometer; all seg-
ments will be shown on the display screen for 1 second and a
beep sound is heard.
The last reading will be automatically shown on the display
screen with the
on the left side of the display screen the device is ready for
measurement.

► As a non-contact thermometer

If the forehead is covered with hair, sweat or dirt, please remove
them before measurement to improve the reading accuracy.
Press and hold ON/SCAN button. On the display screen appears
4 short lines and arrow stops flashing.
Hold ON/SCAN button and steadily move the thermometer
from the temple area to the temple area about 1 cm above the
eyebrow parallel to the skin surface with a distance of no more
than 3 cm. If the probe is placed at an angle on the skin surface
during measurement, the reading will be affected by surrounding
temperature.
After you release ON/SCAN button a beep sound will verify the
completion of measurement and the reading will be shown on
the display screen. 4 short beeps and icon
alert if the temperature is 38°C and above. The device is ready
for the next measurement as arrow icon is flashing again.
1.
3.
Flushed
EN
8
icon. After appearance of flashing arrow icon
2.
4.
3cm
Angled
on the display