Applications; Safety Notes - Leuchtkraft PARC-100/COL Bedienungsanleitung

DMX LED Spotlight
These instructions are intended for installers of
the unit and for users with basic knowledge of
DMX control . Please read the instructions care-
fully prior to operation and keep them for later
reference .
All operating elements and connections de-
scribed can be found on page 2 . The menu
for the settings of the spotlight can be found on
pages 26 and 27 .
Contents
1 Applications . . . . . . . . . . . . . . 14
Safety Notes . . . . . . . . . . . . . 14
2
3 Setting the Spotlight into Operation . . 15
3.1 Installation . . . . . . . . . . . . . . . 15
3.2 Barn doors . . . . . . . . . . . . . . . 15
3.3 Power supply . . . . . . . . . . . . . . 15
4 Operation . . . . . . . . . . . . . . . 16
4.1 Independent operation . . . . . . . . . . 16
4.1.1 Colour spotlight and stroboscope . . . . . 16
4.1.2 Different shades of white
Storing 11 shades of colour . . . . . . . 16
4.1.3 Music control . . . . . . . . . . . . . 16
4.1.4 Show programmes and sequences of scenes 17
4.1.5 Programming sequences of scenes . . . . . 17
4.2 Synchronous control of multiple spotlights
(master / slave mode) . . . . . . . . . . . 17
4.3 Operation with a DMX controller . . . . . . 18
4.3.1 Connection . . . . . . . . . . . . . . 18
4.3.2 Setting the number of DMX channels . . . 18
4.3.3 Setting the DMX start address . . . . . . 18
4.3.4 Using subaddresses . . . . . . . . . . . 19
4.3.5 Functions of the DMX channels . . . . . . 20
5 Additional Functions . . . . . . . . . . 21
5.1 Reducing maximum brightness of the spotlight 21
5.2 White balance . . . . . . . . . . . . . . 21
5.3 LED response time . . . . . . . . . . . . 22
5.4 Resetting the spotlight to its factory settings . 22
6 Cleaning the Spotlight . . . . . . . . . 23
7 Specifications . . . . . . . . . . . . . 23
14

1 Applications

This LED spotlight is used for illumination, e . g .
on stage, in discotheques and function rooms .
The light source is a powerful COB LED (COB =
chip-on-board technology): Many individual LED
chips are densely packed on a PCB to provide a
uniform light distribution .
The spotlight is designed for control via a
DMX light controller (3, 4, 6, 7, 8 or 13 DMX
control channels), but it can also be operated
independently without a controller .

2 Safety Notes

The product corresponds to all relevant directives
of the EU and is therefore marked with
WARNING The product uses dangerous
mains voltage . Leave servicing
to skilled personnel only . Risk of
electric shock!
•
The product is suitable for indoor use only .
Protect it against dripping water, splash water
and high air humidity . The admissible ambient
temperature range is 0 - 40 °C .
•
Do not use the product and immediately dis-
connect the mains plug from the mains socket
if
1 . the unit or the mains cable is visibly dam-
aged,
2 . a defect might have occurred after the
product was dropped or suffered a similar
accident,
3 . malfunctions occur .
In any case the product must be repaired by
skilled personnel .
•
Never pull the mains cable to disconnect the
mains plug from the mains socket, always seize
the plug .
•
No guarantee claims for the product and no
liability for any resulting personal damage or
material damage will be accepted if the product
is not correctly used, if it is not safely installed
or if it is not expertly repaired .
If the product is to be put out of opera-
tion definitely, dispose of the product in
accordance with local regulations .
.