NIXON SUPER HERO Handbuch Seite 23

TO SWITCH FROM LOCAL BEACH TO BEACH 1 OR BEACH 2
PRESS STRT/ STP to switch to BEACH 1 in normal
LOCAL TIDE MODE
PRESS STRT/ STP to switch to BEACH 2 in BEACH 1
TIDE MODE
PRESS STRT/STP to switch to LOCAL in BEACH 2 TIDE MODE
TO VIEW TIDE COUNTDOWN TIME
PRESS SET to switch between normal time display and
TIDE COUNTDOWN TIME in any BEACH mode
(Local, Beach 1, or Beach 2)
DID YOU KNOW?
The MOON phase is already programmed and will accurately
tell you the moon phase until you are old and gray. The TIDE
should be adjusted every few months to ensure accuracy.
COUNTDOWN TIMER MODE
NOTE: The Super Hero Countdown Timer is initially set at a 20 min.
countdown. This is the length of a normal heat, but you can set the
Countdown Timer to any time 20 HOURS or lower. If you're doing
anything for longer than 20 HOURS in a row, something is wrong.
TO COUNTDOWN
PUSH STRT/ STP to start counting down.
STRT/ STP to pause or stop counting down.
PUSH
PUSH LIGHT/ RESET to reset the counter.
TO SET THE COUNTDOWN TIMER
and HOLD for 2 SECONDS the SET button.
PUSH
NOTE: The SECONDS will flash.
PUSH STRT/ STP BUTTON to get to the right second.
PUSH MODE button.
NOTE: The MINUTES will flash.
STRT/ STP BUTTON to get to the right minute.
PUSH
PUSH MODE button
NOTE: The HOURS will flash.
STRT/ STP BUTTON to get to the right hour.
PUSH
HINT: Hold the button down to make the numbers go faster.