Kaiser S 60 U 87 XL Serie Gebrauchsanweisung Seite 48

4
48
3 2 1
Changing the Program
In case you would like to change the wash
program while the dishwasher is in operation,
make the following steps:
Press and keep the button program
•
setting 2 longer than for three seconds.
Now use the same button to select a
required wash program,
• The selected program is indicated as the
symbol on the panel 5.
• Close the door with some force to ensure
it is closed properly.
You can hear a click which indicates that the door
is tightly closed.
Some seconds later the dishwasher begins a
wash cycle.
Wash cycle ending
At the end of a wash cycle for 8 seconds the
buzzer produces an acoustical signal.
5
Open the door. Press the main switch 6 to switch
off the dishwasher.
Wait a few minutes before you start to reload the
dishwasher: the dishes will get dry and not so hot.
EN