DJI Mavic 2 ENTERPRISE advanced Kurzanleitung Seite 7

4. Preparing for Takeoff
Power on the remote controller
Use a DJI account to activate the aircraft and the Smart Controller. Activation
requires an internet connection. Before activating the aircraft in DJI Pilot, power on
the Smart Controller and follow the prompts to activate.
Internet
Set a password for the aircraft in the DJI Pilot app to ensure secure access and
protect your onboard data.
5. Flight
Before taking off, make sure the Aircraft Status Bar
in DJI Pilot displays "Ready to Go".
Manual Takeoff / Landing
Combination stick command to
start/stop the motors
Left stick up (slowly)
to take off
Only stop motors mid-flight in emergency situations when doing so can reduce
the risk of damage or injury. The method to stop the motor can be set in DJI Pilot.
6
Power on the aircraft
Left stick down (slowly) until you touch the
ground
Hold a few seconds to stop the motors
DJI Pilot
App
Launch DJI Pilot
Ready to Go (GPS)
OR