LENCO Xemio-668 Bedienungsanleitung Seite 11

Date, Hour, Minute and seconds setting adjustment.
 Finally, you need to press the
back to Setup menu, if not the date & time will not to memorize and you
need to adjust them again.
Note: the set date & time will be losses if internal rechargeable battery is
fully emptied in protection mode. Adjust the clock again if you want it to use.
b. To change "LCD set"
You can set the backlight to illuminate the screen for a certain amount of
time as you desired or make the backlight to always ON when every time
you turn ON the player.
 To change LCD backlight, choose "LCD set" > choose "Dark mode", a
level bar with number appear then chose "0 (always On) / 5 / 10 / 15 / 20
/ 25 / 30 / 35 / 40 / 45 / 50 seconds" as you desired by using
buttons. Choose "0" to prevent the LCD backlight from turning to
/
off. (choosing this option decrease battery performance)
c. To Change "Language"
This player can use difference OSD languages.
 To set the language, choose "Language", and then choose which
language as you desired by using
d. To Set "Power Off"
The Power Off setting can extend the time between battery charges by
turning OFF the player when you are not using the controls or no operation.
Also, Sleep function provided for more choice.
 To set power off time, choose "Power off", then choose "Off time", a
levels bar with number menu appear, then choose "0 - 200 seconds" as
you want by using
 To set sleep time, choose "Power off", then choose "Sleep time", a levels
bar with number menu appear, choose "0 / 10 / 20 /30 / 40 / 50 / 60 / 70
/ 80 / 90 / 100 / 110 / 120 minutes" as you want by using
buttons.
e. To View "Memory info"
You can view about the memory status of Micro SD card, such as the
numbers of remaining memory space available and the percentage of
memory have used.
 To view the status, choose "Memory info" by using
buttons. An information screen, remaining memory space available and
percentage of memory used, appear for view.
 To return to setup menu or main menu press
hold button.
f. To View "Firmware Version"
You might need to view the details about firmware information inside the
Player.
 Choose "Firmware version" by using
information screen appear for view.
 To return to setup menu or main menu, press
hold button.
button to confirm the adjustment and
and
and /
11
/ buttons.
buttons.
button or press and
and
button or press and
and
and
and /
/ buttons, an
/