Restore Factory Settings - HomeMatic IP HmIP-KRCK Bedienungsanleitung

Restore factory settings

9 Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the key ring remote
control, please proceed as follows:
• Open the battery compartment (G) at the rear
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (see figure 2).
• This will open the catch and the battery compart-
ment cover can be opened (the cover remains at-
tached to the housing).
• Remove a battery.
• Insert the battery ensuring that the polarity is cor-
rect (see figure 4) while pressing and holding down
the system button (F) for 4s with a pointed object
(e.g. a pen) at the same time, until the device LED
(A) will quickly start flashing orange (see figure 5).
• Release the system button again.
• Press and hold down the system button again for
4s (see figure 5), until the device LED lights up
green.
• Release the system button to finish the proce-
dure.
The device will perform a restart.
38