Cloud Parking - Gewiss JOINON I-CON BASIC Bedienungsanleitung

To delete an RFID card from the local list:
# Action to be carried out
Swipe the MASTER key across the RFID scanner to enable
1
the storage phase
Swipe the MASTER key across the RFID scanner again to
2
enable the deletion phase
Swipe the card that you want to delete across the RFID
3
scanner
To quit the RFID card storage menu, swipe the MASTER key
4
across the RFID scanner
To enable a recharging session:
# Action to be carried out
1 Make sure there are no errors on the charging station
Swipe an RFID card across the scanner, close to the graphic
2
symbol
If the card is recognised (i.e. it's in the local list), the re-
3 charging station is activated to begin the charging session,
and waits for the vehicle to be connected.
Once the vehicle has been connected, the station checks
4
that everything is OK for the charging session
If there are no problems, the charging station will block the
5 plug in the socket-outlet both electrically and mechanically.
The recharging session begins
6 The vehicle requests energy from the recharging station
7 Recharging session in progress
To end the charging session, take the same RFID card
used to launch the session and swipe it across the scanner
8
again. The station ends the charging session by releasing
the plug from the Type 2 socket-outlet
Take the plug out of the socket-outlet on the charging
9
station side
10 If the station detects no errors, it will return to standby

10.3. CLOUD PARKING

In this mode, the charging station is connected to a control platform via the OCPP protocol. The OCPP protocol
allows the station to connect to any platform which uses that protocol.
To take advantage of this mode, a specific parameter configuration is needed in order to create correct sta-
tion-platform communication.
The use of connected solutions allows access to a series of advanced options that give both the end
user and the owner better access to the service.
The end user can use the JOINON app or a similar expedient to find the nearest recharging station and access the
service by following the instructions given.
The station owner can monitor the status of the station and the consumption level from remote and in real time.
RGB LED status
From fixed green to flashing white
From flashing white
to flashing red
Fixed green for 2 seconds
From flashing red
to fixed green
RGB LED status
Fixed green
Fixed green
Flashing green
Flashing green
Flashing blue
Fixed blue
Fixed blue or flashing blue
From fixed blue or flashing blue
to flashing green
From flashing green to fixed green
Fixed green
51