Parking - Gewiss JOINON I-CON BASIC Bedienungsanleitung
Wallbox
Vorschau ausblenden
Andere Handbücher für JOINON I-CON BASIC:
- Bedienungsanleitung (29 Seiten) ,
- Installations- und bedienungsanleitung (56 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
#
Action to be carried out
OPTIONAL
During the charging process, the selector can be used to
7
increase or reduce the charging power.
The vehicle itself will then decide which power level to absorb
To end the charging session, disconnect the recharging cable
8
on the vehicle side
Take the plug out of the socket-outlet on the charging station
9
side
10 If the station detects no errors, it will return to standby
NOTE= To end the charging session, stop it first on the vehicle (the method will change de-
pending on the vehicle model; we suggest you refer to the manual of your vehicle
to find the right method). The cable can now be removed from the vehicle, terminating the charging operation.
The station will now allow you to remove the plug.
The following table shows the charging power values used by the station on the basis of the position of the selector
and the nominal power value of the station (to alter the NOMINAL POWER value, refer to chapter 13).
TYPE
VERSION
POWER SUPPLY
SINGLE-PHASE
CABLE OR
SOCK-
FREE
ET-OUT-
LET
THREE-PHASE
10.2. PARKING
The station activates the charging session once a valid RFID card has been swiped.
RGB LED status
Fixed blue
From fixed blue or flashing blue
to flashing green
From flashing green to fixed green
Fixed green
NOMINAL
FACTORY
value that
VALUE
can be set
20
16
20
14
12
10
32
25
32
20
16
14
16
14
16
12
10
8
32
25
20
32
16
14
12
10
Selector
Selector
position 1
position 2
VALUE 60%
VALUE 30%
12
6
10
6
8
6
7
6
7
6
19
10
15
7
12
6
10
6
8
6
10
6
8
6
7
6
6
6
6
6
19
10
15
7
12
6
10
6
8
6
7
6
7
6
49
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
