Environmental Conditions; Support And Fastening Surface - Gewiss JOINON I-CON BASIC Bedienungsanleitung

6.2. ENVIRONMENTAL CONDITIONS

To select the most suitable location, take the environmental operating conditions of the device into consideration.
Environmental conditions
Minimum temperature
Minimum temperature of the surrounding
air
Maximum temperature of the surrounding
air
Maximum relative humidity without con-
densation
Remember that it could occasionally produce a small amount of condensation as a result of temperature changes.
Therefore, in addition to the protection it has, the charging stations must be monitored when they are used in
areas where it is probable that not all the previously indicated conditions will be satisfied.
Never connect the device to the voltage supply when there is condensation.

6.3. SUPPORT AND FASTENING SURFACE

To ensure correct heat dispersal and a good hold, the recharging stations must be installed on a perfectly vertical
wall.
The wall on which the device is fastened must be solid. It must be possible to drill the wall and insert wall plugs
and anchor bolts that are suitable for supporting the device weight.
-25°C
-25°C
+50°C
95%
37