Features And Operation - Ati Sol-D Bedienungsanleitung

At the time of delivery and / or opening of the packaging, check the contents.
Handle the shower gently and protect it from bumps and falls.
The shower must only be used as described in this manual. The manufacturer cannot be
held responsible for damage caused by improper use.
Give these instructions to the user. The user must keep this documentation in order to have it
available for any further consultation. Should the product be sold or transferred to another owner,
always make sure that the booklet accompanies the product, so that it can be consulted by the new
owner.
The technical data plate (FIG-1-2) is placed on the side of the shower. It contains the serial number
and the year of manufacture, which are required to request spare parts or to report technical
problems to the manufacturer.

FEATURES AND OPERATION

2.
Operation (FIG-2-1): the purpose of this product is to heat the domestic hot water by solar radiation.
The incoming cold water (1) heats up due to solar radiation, stratifying inside the tank according to
increasing upwards temperatures.
The water mixer (2) determines the quantity of cold water that will be mixed with hot water just before
the mixed water outlet point (3)
The foot wash tap (4) only supplies cold water
Main parts (FIG-2-2):
A. tank in AISI 316 stainless steel
B. fixing base
C. mixer
D. foot washer tap
E. shower head
F. cold water inlet
dimensions (FIG-2-3)
height
width
depth
basement
Cold water inlet connection
Technical data :
capacity ...................................................... 28 L
empty weight .............................................. 12 kg
full weight ................................................... 40 kg
min inlet pressure ...................................... 100 kpa
max inlet pressure ..................................... 300 kpa
2174 mm
367 mm
190 mm
Ø 190 mm
½" M
Pag. 10 / 36
ENGLISH
210-0271 – edizione 2020-09