Safety Instructions; Specifications; Installation - afx light PROPAR6-HEX Bedienungsanleitung

1. Safety Instructions

Please read the instructions carefully. They contain important information about the installation, operation and
maintenance.
• Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
• The unit should be connected to a main socket outlet with a protective earth connection
• The unit is for indoor use only in a dry location.
• The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure that
no ventilation slots are blocked.
• Disconnect mains power before fuse replacement or servicing.
• Replace fuse only with the same type.
• Make sure there are no inflammable materials close to the unit during operation.
Use safety cable when fixing this unit.
•
In the event of serious operating problem, stop using the unit immediately.
•
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
•
Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
Do not touch any wires during operation as high voltage might be causing electric shock.
•
The product is for decorative purposes only and not suitable as a household room illumination.
•
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.

2. Specifications

Power supply
Consumption
Fuse
DMX control channels
DMX512 Connection
LED type
Number of LEDs
Beam angle
Max. housing temp.
Min. distance from flammable surfaces
Min. distance to lighted objects
Dimensions
Weight

3. Installation

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and
able to support a weight of 10 times of the unit's weight. Also always use a safety cable that can hold 12 times the weight
©Copyright LOTRONIC 2017
GB
PROPAR6-HEX PROPAR12-HEX
AC110~240V 50/60Hz
50W
T1A, 250V
6 / 8 / 12 + HSV
3-pin XLR
12W 6-in-1 RGBWA+UV
6
65°C
235 x 215 x 110mm 280 x 280 x 110mm
2.8kg
PROPAR-HEX
PROPAR18-HEX
100W 160W
T2A, 250V T3A, 250V
3-pin XLR 3- & 5-pin XLR
12
25°
75°C 85°C
0.5m
0.1m
310 x 310 x 110mm
3.5kg 5kg
18
2