Description; Purpose; Product Overview; Safety - GreenWorks G40 Bedienungshandbuch

EN
1

DESCRIPTION

1.1

PURPOSE

The machine is used to clean vehicles, boats, buildings by the
removal of stubborn dirt with clean water and chemical
detergents.
For domestic use only, not for professional use, and for
operation at temperature above 0°C.
1.2

PRODUCT OVERVIEW

Upper handle
1
Spray wand
2
Gun
3
Water inlet
4
Wheel assembly
5
High pressure hose
6
Cord retainer
7
Trigger safety button
8
Spring button
9
10 Inlet coupler
11 Gun holder
2

SAFETY

Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3

INSTALLATION

3.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine before
use.
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
12 Pedestal
13 Nozzle lock button
14 Adjustable nozzle
15 Spray tip cleaning
tool
16 Garden hose
17 Detergent tank
18 Crank handle
19 Trigger
20 Power switch
WARNING
WARNING
WARNING
English
3.2

INSTALL THE SPRAY WAND

Figure 2.
1. Push the end of the spray wand into the gun handle.
2. Turn the spray wand clockwise until the tabs lock into
position.
Make sure that the connection has no leakage.
3.3

INSTALL THE GUN HOLDER

Figure 3.
1. Engage the gun holder into the slot until it locks into its
tabs.
3.4 INSTALL THE WATER INLET
CONNECTOR
Figure 4.
1. Install the water inlet connector onto the water inlet
coupler.
2. Turn the water inlet connector clockwise until it is tight.
3.5

INSTALL THE FRONT PEDESTAL

Figure 4.
1. Aligh the screw sleeves of the pedestal with the screw
holes.
2. Push the screws through the screw sleeves and tighten
them.
3.6 INSTALL THE HIGH PRESSURE
HOSE
Figure 5.
1. Turn the crank handle to release the high pressure hose.
2. Push one end of the high pressure hose into the inlet
coupler.
4

OPERATION

Make sure that all the connections are tight and have no
leakage before operation.
4.1 CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
When you operate the self-coiling hose, make sure that the
hose has no blockage.
4
WARNING
WARNING
WARNING