ECTIVE SI Serie Montage- Und Betriebsanleitung Seite 47

[ ]
® SINUS/SINE INVERTER – SI-/TSI-SERIES
ECTIVE
• Always start with connecting the input voltage and switch the inverter on afterwards.
• Do not install near heat sources or in direct sunlight.
• Avoid dust, humidity and flammable or caustic substances near the inverter.
• The inverter heats up during operation, keep away from heat-sensitive materials.
• Do not drop the inverter and avoid shocks.
• Do not place any objects on top of the inverter.
• Only use all of the original cables delivered with the device.
• Do not open the device.
• Only use dry wipes for cleaning. Switch off the inverter before cleaning.
• Switch of the inverter before all kinds of work.
• In case of sharp-edged ducts please use an empty conduit or cable bushing.
• Do not use the same duct for the 230 V output cable and the DC cable.
• Only use the device if the inverter is without any damage.
• Do not cover the ventilation slits.
• The power supply must be switched off before handling the device.
45