Safety Information - Siemens DG10502 Gebrauchsanleitung

Safety information

This appliance is intended for domestic use
or for household-based, non-commercial
applications. Household-based applications
include, e.g. usage in employees catering
facilities for shops, offices, agricultural and
other commercial operations, as well as
usage by guests of guest houses, small hotels
and similar residential establishments.
Install and operate the appliance as de-
scribed in the text and illustrations. We do
not accept liability for damage resulting
from failure to heed these instructions.
This appliance is intended for use up to an
altitude of 2000 m above sea level.
The appliance may only be installed and
stored in a frost-free room (due to residual
water).
Risk of electric shock!
If an fault occurs, immediately discon-
nect the plug from the power supply!
Immediately shut off the cold water
supply to the appliance should it leak.
The appliance may only be connected
and put into operation by qualified
professional.
To avoid potential sources of danger,
repairs and maintenance may only be un-
dertaken by a suitably qualified specialist.
The statutory regulations of the respective
country, as well as those of the local electric-
ity and water suppliers, must be adhered to.
If the power cord of this appliance is dam-
aged, it must be replaced by the manufac-
turer, an authorized servicing agent or a
similarly qualified person so as to avoid
danger.
The connection cable may not make con-
tact with hot components. This can damage
the insulation.
Do not touch electrically live parts after
installation.
Only a prototype-tested diaphragm safety
valve may be installed.
During the heating process, expansion wa-
ter must drip out of the safety valve outlet.
The outlet pipe of the safety valve must
remain open to the atmosphere.
en
The safety valve prevents excessive pressure
from developing in the water heater during
the heating process. Expansion water must
be able to drain off via the safety valve.
Do not block the outlet pipe!
The size of the outlet pipe must suit the
fully opened safety valve. The blow-off
opening of the safety valve must remain
open to the atmosphere.
The blow-off pipe of the safety group must
be installed with a constant decline in a
frost-free room. Regular maintenance and
operation of the safety valve are required
to remove deposits and to ensure that the
safety valve is not blocked.
The installation instructions of the safety
group must be followed.
A shutoff valve must not be installed
between the safety valve and the water
heater.
Supplied stickers: "For reasons of safe-
ty, water must come out of the outlet
pipe during the heating period! Do not
block!" – attach the stickers to the outlet
pipe in a clearly visible position.
The safety valve must be operated regu-
larly to verify its function and to decalcify
the valve.
Shut off the water supply before connect-
ing the appliance. Do not insert the plug
into the mains socket.
Only connect the appliance to a correctly
earthed electrical socket. Do not use exten-
sion cables.
Disconnect the power supply before
opening the appliance.
Connect the water supply first, circulate
water through the appliance and then
connect the electrical supply.
Compliance with the IEC 60364-7-701
(DIN VDE 0100 Part 701) must be ob-
served during installation of the appliance
or the electrical accessories.
No modifications to the appliance are
permissible.
This appliance can be used by children
aged 8 years and older as well as by per-
sons with diminished bodily, sensory or
9