Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT The Data SIM card in the router must be activated for the Multi-User Call Forwarding
Device Ref. 1083/83 to send calls to a smartphone/tablet. The SIM card activation procedure is
illustrated in the "DATA SIM CARD ACTIVATION AND ROUTER CONFIGURATION" booklet supplied
with the kit Ref. 1083/783.
MAXIMUM DISTANCES AND WIRE SECTIONS
Type of connection
LAN
(*) The maximum permissible distance is that defi ned by IEEE 802.3 for Fast Ethernet networks (100 Mb/
s) with UTP CAT5 connections, which establishes that the maximum distance between two Ethernet
devices connected to each other must be 100 m.
(#) To ensure operation of the device at maximum distances, the wire must be in Category 5e and the
section of the twisted pairs must be AWG24.
The maximum resistance of the individual wires must not exceed 10ohm/100m.
The connection between the door phone and POE switch must be ensured by a single cable
without any extra patch cords.
The cable must be up to the following standards:
- EIA/TIA 568-B.2 o EIA/TIA 568-C.2
- EN50288 3-1
- IEC 61156-5
Wires with cross-section area of 0.5 mm
cross section area smaller than 0.5 mm
KEY TO SYMBOLS
Symbol
~
12
Max. distance
100 m (*)
or larger must comply with IEC 60332-1-2; wires with
2
must comply with IEC 60332-2-2.
2
Alternating input voltage
Direct input voltage
See the installation manual of the device
Min - max section
CAT5e (#)
Spiegazione
DS1083-128
Werbung
Inhaltsverzeichnis
