Philips Azur GC4500 Sberie Bedienungsanleitung Seite 6

ENGLISH
8 8
Take out the Quick Calc Release tray (Fig. 16).
2
3 Pour out scales in the tray into a sink or dustbin. Clean the tray using tap water. Remove any
excess water from the tray (Fig. 17).
Do not pour water, vinegar, descaling agents or other chemicals into the iron from the opening of the
Quick Calc Release.
Do not use vinegar, descaling agents or other chemicals to wash the tray.
Wipe off the scales in the opening of the Quick Calc Release tray with a damp cloth (Fig. 18).
4
Insert the tray back into the iron (Fig. 19).
5
Push down the Quick Calc Release lock (Fig. 20).
6
Do not use the iron when the Quick Calc Release tray is not locked.
If you break or lose the tray, contact a consumer care center in your country (see the worldwide
guarantee lealet for contact details).
Calc-clean function
IMPORTANT: Besides Quick Calc Release function, you should also perform calc-clean once every 1 month to
prolong the life of your iron. If water in your area is very hard, or you see scales coming out from the soleplate
during ironing, use this function more frequently.
1 Make sure the iron is unplugged and the steam slider is set to dry setting.
2 Fill the water tank to the MAX indication.
Do not pour vinegar or other descaling agents into the water tank.
3 Plug in the iron and set the temperature dial to MAX.
4 Unplug the iron when the temperature light goes out.
5 Hold the iron over the sink. Keep pushing the calc clean button and gently shake the iron forth and
back until all water in the water tank has been used up (Fig. 21).
Scales is lushed out, steam and boiling water also come out of the soleplate.
Note: Repeat steps 2 to 5 if the water that comes out of the iron still contains scale particles.
6 Plug in the iron and let the iron heat up to dry the soleplate.
7 Unplug the iron when the temperature indicator light goes out.
8 Move the iron gently over a piece of cloth to remove any water stains on the soleplate.