English - IKEA STYRBAR Handbuch

English

Remote control functions
Short press to turn on. To dim up, press and
hold the button.
Short press to turn off. To dim down, press and
hold the button.
Change white spectrum or colours .
Pairing: Add IKEA Smart Lighting products to
your system. See instructions below.
Adding devices to your remote control
When the remote control is sold together with a
light source (in the same package), they are already
paired. If the remote control is purchased separately,
you must manually pair it to your light source.
To add light sources, just repeat the steps below.
1. Make sure that your light source is installed and
the main power switch is turned on.
2. Hold the remote control close to the light source
you want to add (no more than 5 cm away).
3. Press and hold the pairing button
10 seconds. A red light will shine steadily on the
remote control. Your light source will begin to
dim and flash one time to indicate that it has
been successfully paired.
Up to 10 light sources can be paired with 1 remote
control. Make sure to pair them one at a time. If the
light sources are close to each other, disconnect
those that have already been paired from the main
power switch.
4
for at least