Philips GC9500 Bedienungsanleitung Seite 9

Energy saving
ECO mode
By using ECO mode (reduced amount of steam), you can save energy
without compromising on the ironing result.
1 To activate the ECO mode, press and hold the on/off button for
2 seconds. The light turns green.
2 To switch back to the 'OptimalTemp' setting, switch the steam
generator off and on again.
Safety Auto-off (speciic types only)
The Safety Auto-off function automatically switches off the appliance if
it has not been used for 10 minutes, to save energy.
IMPORTANT - Cleaning and maintenance
IMPORTANT - Descaling the steam generator
To ensure a long life for your steam generator, it is very important that
you perform the descaling procedure when the EASY DE-CALC light
starts to lash.
The EASY DE-CALC light starts lashing after approx. one month or
-
10 ironing sessions to indicate that the steam generator needs to be
descaled. To descale the steam generator, perform the steps below.
Never remove the EASY DE-CALC knob when the steam generator
is hot.
1 Press the on/off button to switch off the steam generator and
remove the plug from the wall socket.
2 Place the steam generator on a stable table with the EASY
DE-CALC knob sticking out beyond the edge of the table or
take the steam generator to a sink.
3 Hold a cup under the EASY DE-CALC knob. Turn the EASY
DE-CALC knob anti-clockwise and let the water with scale particles
low into the cup. When no more water comes out of the steam
generator, reinsert the EASY DE-CALC knob. Turn the knob
clockwise to fasten it and put the plug back into the socket again.
You can now use the steam generator again.
ENGLIsH
9