Maintenance; Troubleshooting - Husqvarna BLi100C Bedienungsanweisung

Connection LED light (7)
Connection LED is blue.
Connection LED is off.
Connection LED flashes red.
Connection LED is red.
LED light with lock symbol (6)
The LED with lock symbol is on.
The LED with lock symbol is off.
To charge the battery
Charge the battery before the first time of operation. The
battery is only 30% charged when delivered.
1. Put the battery in the battery charger. Make sure that
the battery (1) is connected to the battery charger (2).
2. When the battery is connected to the battery charger,
the charging LED (4) on the charger is on.
To do maintenance
• Make sure that the battery, battery charger and
terminals on the battery are clean and dry before you
put the battery in the battery charger.
Battery
Condition
The Connection LED
(7) flashes red.
Connection LED (7) is
red.
A connection to a de-
®
Bluetooth
vice with
wireless technology is
not found.
Battery charger
Condition
The Warning LED (5)
flashes.
545 - 005 - 12.09.2018

Troubleshooting

Possible faults
Temperature deviation.
The battery is empty.
The battery is too hot.
Permanent battery error.
The battery disconnects from the device with
®
Bluetooth
wireless technology, if the battery is
moved out of range.
Possible faults
Permanent battery charger error.
Battery status
The battery is connected to a device with
gy.
The battery is not connected to a device with
nology.
Temporary battery error. Refer to
Permanent battery error. Refer to
Battery status
The battery is locked.
The battery is unlocked.
3. The battery is fully charged when all LEDs on the LED
indicator (8) are on.
4. Remove the battery from the battery charger.

Maintenance

• Make sure that the battery guide tracks are clean.
• Clean plastic parts with a clean and dry cloth.
• Make sure that the battery and the battery charger are
not damaged.
Bluetooth
Bluetooth
Troubleshooting on page 5
Troubleshooting on page 5
CAUTION: Use the battery charger only when
the surrounding temperature is between 5 °C
(41°F) and 40 °C (114°F).
Possible action
Use the battery in ambient temperatures be-
tween -10 °C (14°F) and 40 °C (104°F).
Charge the battery.
Let the battery cool down.
Speak to your dealer.
Move the battery or the device into range to
connect the battery automatically. If the battery
does not connect automatically, refer to
connect the battery to the Husqvarna Connect
App on page 4 to connect manually. If it is not
possible to connect manually, restart the device
with the Husqvarna Connect App installed. If
the problem stays, speak to your dealer.
Possible action
Speak to your dealer.
®
wireless technolo-
®
wireless tech-
To
5