Maintenance - Husqvarna BLi100C Bedienungsanweisung

• The Lock LED (6) shows if the battery is locked.
Battery LED lights
LED indicator (8)
All LEDs are on.
3 LEDs are on.
2 LEDs are on.
1 LED is on.
1 LED flashes.
Connection LED light (7)
Connection LED flashes blue.
Connection LED is blue.
Connection LED is off.
Connection LED flashes red.
Connection LED is red.
LED light with lock symbol (6)
The LED with lock symbol is on.
The LED with lock symbol is off.
To charge the battery
Charge the battery before the first time of operation. The
battery is only 30% charged when delivered.
1. Put the battery in the battery charger. Make sure that
the battery (1) is connected to the battery charger
(2).
2. When the battery is connected to the battery
charger, the charging LED (4) on the charger is on.
To do maintenance
• Make sure that the battery, battery charger and
terminals on the battery are clean and dry before you
put the battery in the battery charger.
545 - 003 - 11.05.2018
State of charge
The battery is 75%-100% charged.
The battery is 50%-75% charged.
The battery is 25%-50% charged.
The battery is 5%-25% charged.
The battery is empty.
Battery status
The battery identification process starts on a device with
wireless technology.
The battery is connected to a device with
nology.
The battery is not connected to a device with
technology.
Temporary battery error. Refer to
Permanent battery error. Refer to
Battery status
The battery is locked.
The battery is unlocked.
3. The battery is fully charged when all LEDs on the
LED indicator (8) are on.
4. Remove the battery from the battery charger.

Maintenance

• Make sure that the battery guide tracks are clean.
• Clean plastic parts with a clean and dry cloth.
• Make sure that the battery and the battery charger
are not damaged.
®
Bluetooth
Bluetooth
Troubleshooting on page 6
Troubleshooting on page 6
CAUTION: Use the battery charger only
when the surrounding temperature is
between 5 °C (41°F) and 40 °C (114°F).
®
Bluetooth
wireless tech-
®
wireless
5