Maintenance; Maintenance Intervals; Maintenance Description - getAir Smart Bedienungsanleitung

5 Maintenance

DANGER
Risk of electric shock!
• Before starting maintenance: switch off the
ventilation unit.
• Before starting work on the fan or heat
exchanger: disconnect the ventilation unit
at all poles and secure against unintention-
al reconnection.

5.1 Maintenance intervals

Component
Inside cover
Filter
Fans
Heat exchanger
Window reveal version
Special loft/cellar
solution

5.2 Maintenance description

Filter replacement
INFORMATION
Observe the installation instructions on the
inserts supplied with the filter.
INFORMATION
Filters for various applications are available as
accessories.
20
Interval Action
As necessary • Clean surfaces with a damp cloth.
Quarterly • Check the filter.
• Vacuum soiled filters with a vacuum cleaner.
• Replace heavily soiled or defective filters.
• Confirm filter replacement on the programming
Annually • Check the fans.
• Clean the fans if necessary with a brush or
Annually • Check the heat exchanger.
• Clean the ducts if necessary with a vacuum
• Vacuum soiled prefilters with a vacuum cleaner.
• Replace heavily soiled or defective prefilters.
Quarterly • Check the prefilter in the window reveal grille.
• Vacuum soiled prefilters with a vacuum cleaner.
• Replace heavily soiled or defective prefilters.
• Check the sound insulation mat and clean it with
Quarterly • Check the condensate drain in the bend.
• Remove any condensate.
unit.
vacuum cleaner.
cleaner or carefully with warm water.
a damp cloth if necessary.
Replace the filter as follows:
• Remove the inside cover from the
mounting tube or, in the case of perma-
nently mounted covers, remove their
front panel.
• Remove the filter from the retainer.
• Check the filter; clean or replace if
necessary.