Introduction; Inspection - Senco PC1010N Bedienungsanleitung

Congratulations on the purchase of your new SENCO® Air Compressor! You can be assured your
SENCO Air Compressor was constructed with the highest level of precision and accuracy. Each
component has been rigorously tested by technicians to ensure the quality, endurance and performance
of this air compressor.
This operator's manual was compiled for your benefit. By reading and following the simple safety,
installation and operation, and maintenance steps described in this manual, you will receive years of
troublefree operation from your new SENCO Air Compressor. The contents of this manual are based on
the latest product information available at the time of publication. The manufacturer reserves the right to
make changes in price, color, materials equipment, specifications or models at any time without notice.
A "DANGER, WARNING or CAUTION" safety warning will be surrounded by a "SAFETY ALERT
BOX." This box is used to designate and emphasize Safety Warnings that must be followed when
operating this air compressor. Accompanying the safety warnings are "Signal Words" which
designate the degree or level of hazard seriousness. The "Signal Words" used in this manual are
as follows:
DANGER: Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
WARNING: Indicates an imminently hazardous situation which, if not avoided,
COULD result in death or serious injury.
CAUTION: Indicates an imminently hazardous situation which, if not avoided
MAY result in minor or moderate injury or damage to the air
compressor.
ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL
INSTRUCTIONS IN THIS MANUAL AND ANY INSTRUCTIONS SUPPLIED BY MANUFACTURERS
OF SUPPORTING EQUIPMENT BEFORE OPERATING THIS AIR COMPRESSOR AND ESPECIALLY
POINT OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY
TO THE OPERATOR.
Unbox the air compressor and write in the serial number in the space provided below. Inspect for signs of
obvious or concealed freight damage. Be sure that all damaged parts are replaced and any mechanical
problems are corrected prior to the operation of the air compressor.
SERIAL NUMBER__________________________________________
If you have Questions or Comments call SENCO's toll-free Action-line: 1-800-543-4596 or, e-mail:
toolprof@Senco.com
Please have the following information available for all service calls:
Senco, 4270 Ivy Pointe Blvd., Cincinnati, OH 45245

Introduction

Safety Alert!
The symbols set to the left of this paragraph are "Safety Alert
Symbols." These symbols are used to call attention to items
or procedures that could be dangerous to you or other
persons using this equipment.

Inspection

1. Model Number
2. Serial Number
3. Date and Place of Purchase
3