Abus HDCC72500 Bedienungsanleitung Seite 45

D-ZOOM
TIME
STANDARD
The SMART D-ZOOM function becomes active only after exiting the camera
menu.
NEGATIVE
IMAGE
MOTION The camera's internal motion detection is integrated into the processor platform
by default. This camera type does not have an interface (e.g. alarm output) to
allow this function to be used.
AREA
SELECTION
(1~4)
AREA DISPLAY
(ON/OFF)
SENSITIVITY
(0~100)
MOTION
INDICATION
(OFF/ON)
STANDARD
PRIVATE ZONES This function allows private zones to be set up in the video image to protect areas
that are not to be monitored.
AREA
SELECTION
(1~8)
AREA
(ON/OFF)
TRANSPARENCY
(0~3)
MOTION
INDICATION
(OFF/ON)
STANDARD
Zoom factor setting after detecting motion in the configured
area.
Duration of the automatic digital zoom. Afterwards, full-
screen mode is reactivated.
Reset all settings made to the SMART D-ZOOM function.
Display the video image as a negative.
Selection of area (max. four)
Activate/deactivate the preview frame. The position and
size of the area can be changed using the ENTER button.
Sensitivity for motion detection.
A mark is displayed in the corresponding area in the live
view when motion is detected.
Reset all settings made to this function.
Selection of an area for the configuration
DISPLAY Activate/deactivate the preview frame. The position and
size of the area can be changed using the ENTER
button.
Intensity of the colour display (transparency)
A mark is displayed in the corresponding area in the live
view when motion is detected.
Reset all settings made to this function.
45
English