Keep Warm Function - babymoov Nutri smart Bedienungsanleitung

4 - PROGRAMMABLE START (NOT AVAILABLE IN CAR MODE)
• You can choose to delay the heating process (15 mins, 30 mins, 45 mins, 1hr, 2hrs... 12hrs).
• Once the heating steps are complete, the programmable start button flashes (7).
• Press the programmable start button (7).
• Change the timer by pressing the arrows.
• Press OK to confirm. The heating process will start at the selected time.
• To cancel the programmable start and start the heating process immediately, press the programmable start button (7) for
5 secs.
1
3

5 - KEEP WARM FUNCTION

IMPORTANT: the KEEP WARM function operates in bain-marie mode only (and is not
recommended for use in the car).
• Activates automatically for 1 hour after the heating process is finished.
• Press the OK button to pause the keep warm function.
• Press the OK button once again to restart the keep warm function (keeps the temperature at
37°C).
• Once the keep warm period is finished, the bottle warmer will automatically go into standby.
• To deactivate the standby mode, press the OK button so that the bottle warmer turns back
on and suggests the previously used heating time.
Press the OK button once again, and the product will start heating up.
Cleaning the bottle warmer:
• Wait until the bottle warmer is cold before cleaning it.
• Always unplug the appliance before cleaning it.
• Never immerse the appliance in water and do not fill completely with water.
• Do not use detergent to clean the appliance.
• Use a slightly damp cloth to clean the inside and outside.
• The adapter ring, measuring cup and basket for baby food jars are all dishwasher-safe.
16
CARE GUIDE
NUTRISMART • Instructions for use
15 min
2
12 hrs
3 secs