Technical Features; Technical Specifications - babymoov Nutri smart Bedienungsanleitung

FOR USE AT HOME:
• Electric power supply: 220/240 V - 50/60 Hz.
• Wattage: 500 W.
• Speed: 2 minutes 20 seconds for a 250 ml baby bottle.
2 minutes for a 250 g baby food jar.
• Maximum width of baby bottles: 80 mm.
• Minimum heating time: 1 minute 20 seconds**
** for heating a baby bottle containing 60ml of water at room temperature from 20 °C to 35 °C.
All the NutriSmart programmes have been set using plastic baby bottles. If you
use glass bottles, reduce the time by 20 % (e.g. for a 60ml bottles, reduce 1 min
25 seconds to 1 min 10 seconds).
Warning: white marks may be visible as a result of the Quality Control checks.
Wipe the product with a damp cloth before using for the first time (except the
electric plug).
Never immerse the electric base in water.
If you make a mistake when programming your appliance, you cannot go back.
Re-start the product (ON/OFF) or press OK for 5 seconds, then press one of the
two arrows to go back to zero.
1- STARTING THE NUTRISMART
Turn on the NutriSmart by pressing the right or left button on the back
to activate:
HOME MODE
Do not use the car adaptor for the home.
Simply plug the product into the mains socket using the power cable.
CAR MODE
Stop the vehicle and let the engine running. To ensure the product
works correctly, plug the car adapter (e) into the socket on the product
(f) and then into your car's cigarette lighter. Bain-marie heating is not
recommended for the car as the heating time is very long.
Be sure to place the NutriSmart on a flat surface to avoid the contents
spilling out.

TECHNICAL FEATURES

Universal: for all types of baby bottles and baby food jars.

TECHNICAL SPECIFICATIONS

INSTRUCTIONS FOR USE
NUTRISMART • Instructions for use
FOR USE IN THE CAR:
• Electric power supply: 12 V DC.
• Wattage: 100 W.
• Energy consumption during operation:
500 W (home mode / 100 W (car mode)
• Energy consumption on standby: < 0.5 W
13