Remote Control Operation Range - Wörlein SOUNDMASTER DAB950 Bedienungsanleitung

Handling the Batteries
•
Improper or incorrect use of batteries may cause corrosion or battery leakage, which could
cause fire, personal injury or damage to property.
•
Install the batteries correctly by following the polarity (+ and -) indications in the battery
compartment.
•
When the batteries are exhausted, the remote control will not function.
•
Only use the battery type indicated in this manual.
•
Do not dispose of the used battery as domestic waste. Dispose of them in accordance with
local regulations.
Handling the Remote Control
Be aware of your fingernails when removing the battery cover and the batteries.
•
Do not drop the remote control.
•
Do not allow anything to impact the remote control.
•
Do not spill water or any liquid on the remote control.
•
Do not place the remote control on a wet object.
•
Do not place the remote control under direct sunlight or near sources of excessive heat.
•
Remove the batteries from the remote control when not in use for a long period of time, as
corrosion or battery leakage may occur and result in physical injury, and/or property
damage, and/or fire.
Point the remote control at the unit no more than 5 metres from the remote control sensor and
within 60º horizontally and 20º vertically of the front of the unit. The operating distance may vary
depending on the brightness of the room.
 Make sure that there is no obstacle between the remotes sensor
of the unit and remote control. If you install the unit on a TV
stand, etc., the remote control range may decrease depending
on the thickness or color of the glass of the TV stand.
 Do not expose the infrared remote sensor to direct sunlight or
other strong light, such as inverter fluorescent light.
AC Power Connection
Caution:
- Risk of product damage! Ensure that the power supply voltage corresponds to the voltage
printed on the rating label on the back or on the underside of the unit.
- Before connecting the AC power cable, ensure that you have completed all other
connections.
- Connect the small end of AC socket at the back of unit and insert the plug of the AC power
cable into a standard AC wall outlet.
- Be sure to unplug the power cable from the outlet when the system is not in use for an
extended period of time.

REMOTE CONTROL OPERATION RANGE

CONNECTIONS
DAB950 / English Instruction Manual
3