Dab Operation - Wörlein SOUNDMASTER DAB950 Bedienungsanleitung

DAB radio mode receives DAB/DAB+ digital radio and displays
information about the station and program/track as broadcast.
1. Scanning for stations
The first time you use the unit, or if the station list is empty. You may also need to start a scan
manually to update the list of stations for one of the following reasons:

New stations may become available from time to time

Stations close or can no longer be received (In station list, invalid stations are indicated with
a question mark in front of their name).

If reception was not good after the original scan (for example the antenna was not up), this
may result in an empty or incomplete list of available stations.

If you have poor reception of some stations causing the audio to break up, you may wish to
list only stations with good signal strength.
To do a full scan
Select "MENU > FULL SCAN"
Once a scan is complete, the radio returns to playing the previously-
selected station or first station on the station list.
To remove stations that they are listed but unavailable
Select "MENU > PRUNE"
This removes all invalid stations, indicated in the station list with a "?" in front of the station
name.
2. Selecting stations
To change station use the
button on the unit to scroll through the list of station, press the
button on RC or on unit to change station.
3. Presets
The unit has 40 preset memories for DAB
To store a station in a preset memory
Press and hold the "PROGRAM" button 3~5 seconds until the
display shows "Preset Store". Presets (1-40) are displayed as
either "Empty" or with the currently stored station name.
Use the button on the RC or on the unit to choose a preset memory, then press the
button on RC or on the unit to store the currently playing station. After confirming the
preset station is stored the display reverts to the "Now playing" screen.
To recall a preset station
Select one of the listed preset stations using the P-/+ button on the RC. Then press
button on the unit to choose the displayed preset station. You can also use the numbers on
the remote control to select the station (1, 2, 3,...)
4. Manual tune
As well the normal method of scanning, you can also manually tune to a particular
channel/frequency. This can be useful for adjusting your antenna to achieve the best possible
reception and scanning a particular channel to update the station list.

DAB OPERATION

button on the RC or use the
8
DAB950 / English Instruction Manual