Factory Reset; Maintenance - Wörlein SOUNDMASTER DAB950 Bedienungsanleitung

Program
When playing music, press the
"PROGRAM" button, then the following information will be displayed
on the screen.
You can choose track by RC digital key to store as P01, P02 etc. In this process, press the
"PROGRAM" button to go to the next channel setting. After finished setting, press the
to finalize. In program playing back, the digital keys on RC is invalid, you can only press the
buttons to change track. Change source or press the
setting. The max. channel is 20!
1. Insert the USB device USB plug into the
button repeatedly on the top of the unit or press the "USB" button on the RC to
2. Press the
select the USB function.
3. The device´s stored music will be played automatically.
„Playing Random" and „Program" is the same as in CD mode
For devices with a USB cable:
1. Insert one plug of the USB cable (not supplied) to the USB
socket at the rear of the unit.
2. Insert the other plug of the USB cable to the USB output
terminal of the USB device.
USB charging (5V
You can plug an USB cable in the 5V
If the USB device is corrupted, this unit will not be able to detect and play the music stored.
Format the USB mass storage device and restore the music on the device with a computer.
1. Choose the "DAB" Mode.
2. Press the "MENU" button on the RC, change with the
button on the RC. The display shows <Factory Reset>. Then press the
and choose with the
new.
Cleaning the unit
Ensure the unit is fully unplugged from the mains socket before cleaning.

To clean the unit, wipe the case with a slightly moist, lint-free cloth.

Do not use any cleaning fluids containing alcohol, ammonia or abrasives.

Do not spray an aerosol at or near the unit.
Handling Discs

Do not touch the playback side of the disc.

Do not attach paper or tape to the disc.
button on RC, then press the
USING THE USB
1A socket only)
1A USB socket to charge the mobile device.

FACTORY RESET

button <Yes>. At least press the

MAINTENANCE

DAB950 / English Instruction Manual
button twice to clear program
port at the rear of the unit.
button to „System" and press the
12
button again
button and the unit starts
button